BroadLink
RM2 User Manual
V2.0
Quick Setup Options
Step 1. Download the BroadLink App:
OR
OR
Step 2：
Plug the RM2’s power supply into a power outlet.
Step 3：
Ensure the blue light on the RM2 is flashing rapidly at about 5-6 times per sec. Otherwise, please press the reset button located next to the power input (see diagram) until the blue light is flashing quickly (about 5-6 times per second).
Launch the e-Control App and start the setup.
Note: Before starting to setup the device, make sure your iOS/Android smartphone is connected to your home Wi-Fi network.
Press to start configure Fast flash at 5-6 times per sec.
l The first time you launch the Broadlink App, it will take you to the setup wizard.
l Alternatively, tap “Add new device” button on the System Setup menu. You can find the system setup menu by swiping your finger right on the main page.
l Then, follow the setup instructions.
l After setup, the flashing of the blue light will slow down and then stop flashing, which means the device is successfully connected to your Wi-Fi network. You will also see the notice on the smartphone screen advising of this successful connection to your Wi-Fi network..
l Next, swipe your finger left on the main page to see the device list.
l The RM2 should be listed there.
Functions
1. Add a device template to learn IR or 433/315 MHz signal.
l Tap RM2 device icon, then Tap add “+”icon
l Then choose a template, you can name this device and give it a picture
l Tap Ok
l Go into the template, then tap any icon to set the IR or 433/315 MHz control command.
Enjoy and try different device templates …
2. Add a scene
l Add a scene in the system setup menu.
l Following the wizard, add a picture and name the scene, then add the sequence of control commands that you want.
l You can adjust the timing delay between the commands.